- Loosen the cap by running hot water over it, or by hitting the cap against a hard surface.
- Break the seal with scissors or a sharp object like a steak knife, but exercise caution when handling blades. Saw back and forth to break the seal.
- Wrap a rubber band around the cap and then try to open it; the rubber acts as a grip so you can apply all your pressure to break the seal.
Loosening the Bottle Cap
Hold the cap under hot water to make it more flexible. Place the bottle cap under the hot water for about a minute, and then dry it with a towel. Just be careful that you don’t burn yourself! Wrap a towel around the bottle before opening if the cap is too hot to grip with your bare hands. Hot water will loosen the plastic cap, making it easier to unscrew the bottle. Don’t make the water too hot or run it over the cap for too long. This could potentially melt the cap or damage the bottle—or, at the very least, it could heat up the cold contents of your bottle, which would be unpleasant.
Tap the cap against a hard surface to loosen it from the bottle. Firmly hold the bottle of water in your hand and hit the cap against a hard surface, such as the edge of a countertop. Tap the side of the cap against the surface to loosen it, rather than the top of the cap.
Ask a friend to open the bottle for you. If you can’t get the bottle cap to twist off on your own, it might be time to see if your friend or neighbor can help you out. Sure, it may hurt your pride, but the smooth, refreshing taste of water will soothe your wounded ego.
Opening with a Rubber Band
Wrap a rubber band tightly around the cap. If you can’t get a good grip on the bottle, use a rubber band to offer you some traction. You probably have some rubber bands lying around your house, but if not, you can get some at a convenience store. If you don't want to trek all the way to the store for rubber bands, try wrapping a hair tie, plastic wrap, or a rubber glove around the bottle, or anything else you've got at home that could offer some traction.
Space the band’s loops evenly around the cap. If the lengths of the rubber band are unevenly spaced on the bottle cap, it might be a little harder to grip it. Make the surface you’re gripping as smooth as you can by spacing the rubber band loops evenly around the lid.
Twist counterclockwise and remove the cap. Apply all your pressure to break the seal. When the seal is broken, you’ll hear a little crack, and voila! Delicious water is yours for the drinking.
Twisting the Cap by Hand
Grip the bottle with your non-dominant hand. Grasp the bottle firmly with your fingers, but don’t squeeze the bottle, or else its contents will go everywhere once you open the lid. Grip the bottom part of the bottled water with your left hand if you’re right-handed, or right hand if you’re left-handed.
Twist the cap counterclockwise with your other hand to break the seal. Use your dominant hand to twist until the cap becomes loose and breaks the seal. Make sure you’re holding the bottle tightly so only the cap twists, not the bottle. If the ridges on the cap are too sharp, use your shirt as a buffer between your hand and cap. Be careful not to hold your bottle at a downward-facing angle! You don't want to be mopping up the water once you get the cap off.
Unscrew the cap and enjoy the water. Once you break the cap's seal, the cap will easily screw off. You now have an open bottle of water!
Breaking the Seal
Saw the seal with a sharp object, such as scissors or a knife. Scissors will probably be the easiest and safest, but you could also use a steak knife if you need to. Start a sawing motion, back and forth, with the blade along with the seal. Continue until you've broken the seal. The seal is a thin plastic ring located at the very bottom of the cap—it’s attached to the cap via a perforated line. Be careful handling sharp objects!
Use your hands to twist off the lid. Twist the cap firmly in a counterclockwise direction. After a portion of the seal has been broken, it’ll be easier to use your hands. Badaboom! Water!
Saw the rest of the seal, if needed, and remove the cap. If your bottle cap is still giving you trouble, use the blade to remove the entire seal. Once the whole seal is removed, there will be nothing keeping you from removing that lid and hydrating.
Comments
0 comment